Sale!

PreSonus R65 Active AMT Studio Monitor

$399.95 $299.95

The PreSonus R65 utilizes a 6.5″ , custom-coated, woven Kevlar® low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency rtesponse range. Biamped and driven by a 150 W Class D amplifier—making the R Series some of the most powerful monitors in their category.

In stock

SKU: 673454004339 Category: Tags: , Brand:

Description

In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed PreSonus R65 tweeter uses an incredibly thin, folded Kapton membrane (< 0.01mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Wide, consistent stereo image
An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1″ dome tweeter, enabling R65 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R65 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R65 reacts predictably and sounds consistent from room to room.

Transparent sound
The PreSonus R65 utilizes a 6.5″ , custom-coated, woven Kevlar® low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency rtesponse range. Biamped and driven by a 150 W Class D amplifier—making the R Series some of the most powerful monitors in their category—these monitors deliver an open, clear, and less fatiguing listening experience.

Have it your way
You can customize the R65 in several ways. It’s available with black or blue faceplates to fit your studio décor. With balanced XLR, balanced 1/4” TRS, and unbalanced RCA line-level inputs, it’s easy to feed audio to your R65 monitors from a mixer, an interface, a media player, or almost any other line-level source. And R Series monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.

PreSonus R65 Features

Components and construction

  • 2-way active AMT design provides articulate high-frequency response and wide stereo imaging
  • Custom-designed, 6.8″, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies
  • 6.5 Kevlar LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass
  • Balanced XLR and 1/4″ TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment

User controls

  • Acoustic Space settings (Linear, -1.5dB, -3dB, -6dB) compensate for room placement

​Power and safety

  • Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
  • RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection
  • Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W
  • External mains fuse
  • Internal power supply with IEC connector

Specifications

Inputs

  • 1- Balanced XLR
  • 1- Balanced 1/4” TRS
  • 1- Unbalanced RCA

Performance

  • Frequency Response: 45Hz – 22kHz
  • Crossover Frequency: 2.7kHz
  • LF Amplifier Power: 100 W Class D
  • HF Amplifier Power: 50 W Class D
  • Peak SPL (@ 1 meter): 104dB
  • LF Driver: 6.5” Kevlar
  • HF Driver Type: AMT
  • Diaphragm: 6.8″ 2 (4,400mm2)
  • Equiv. Diaphragm ø: 3” (75mm)
  • Input Impedance: 20kOhm balanced, 10kOhm unbalanced
  • SNR (typical, A-weighted): >100dB

Power

  • Factory preprogrammed 100-120V ~50/60Hz or 220-240V ~50/60Hz
  • Standby Power: < 0.5W

Protection

  • RF interference
  • Output-current limiting
  • Over-temperature
  • Turn-on/off transient
  • Subsonic filter
  • External mains fuse

User Controls

  • Volume Range: A-type taper
  • HF Driver: Linear, +1dB, -3dB, -6dB
  • Highpass filter: Linear, 60Hz, 80Hz, 100Hz
  • Acoustic Space: Linear, -1.5dB, -3dB, -6dB
  • Energy Conservation Mode: On/Off/Query

Cabinet

  • Vinyl-laminated, medium-density fiberboard

Dimensions

  • Width: 8” (203mm)
  • Depth: 10.3” (261mm)
  • Height 13” (328 mm)
  • Weight 14.7 lbs (6.65 kg)

Additional information

Weight 14.7 lbs
Dimensions 13 × 10.3 × 8 in
Brand

Reviews

There are no reviews yet.

Be the first to review “PreSonus R65 Active AMT Studio Monitor”

Your email address will not be published. Required fields are marked *